Universaalne Autode Diagnostikaseade Autel AP200H 2024

Functions: 
1. MIL/ Live Data/ O2 Monitor/ IM Readiness:

If there is something wrong with vehicle operations, drivers will be alerted.
Provide the Info. of Oxygen Sensor Rich/ Lean Indication, Coolant Temp, MAP/TPS Value, Vehicle Speed, Mass Air Flow, Ambient Temp, Engine RPM, etc.
PCM can verify that O2 sensors are properly calibrated and function without noticeable deterioration.
The car's emission control systems will be self-tested, and you can know if your vehicle has completed tests successfully.



2. 4 System Diagnoses. (Engine/Transmission/ABS/SRS)

The AP200H device provides accesses to all available systems, which are integrated into categories such as Engine/ Transmission/ Airbags/ ABS Systems. Manually locate a required control system for testing through a series of selection choices. The Function Menu options vary slightly for different vehicles. The function menu may include:

ECU Information -- provides the retrieved ECU information in detail. An information screen opens upon selection.
Read Codes -- displays detailed information of DTC records retrieved from the test vehicle's ECU.
Erase Codes -- erases DTC records and other data from the test vehicle's ECU.
Live Data -- retrieves and displays live data and parameters from the test vehicle's ECU.



3. Autel MaxiAP AP200H consists of Health Reports, EOBD Diagnosis and Manufacturer-related Health Check

The AP200H snapshot easy-to-use Health Check Application is used to identify health state of your car. With this function, you can know health rating, generate corresponding reports, and gain a quick grasp on vehicle health condition and status. It can make you know the required service and the needed information, thus, you can take care of your vehicle easier. It can save repair reports for diagnostic and maintenance service sessions as well.

Good -- The Vehicles is in fine health state with no fault codes detected.
Acceptable -- The Vehicle is in fair health condition with some fault codes detected.
Bad -- The Vehicle is in poor health status with some fault codes detected.
Unknown -- The Vehicle's health state is unidentified with unknown number of fault codes.
The EOBD Diagnosis consists of the DTC Status and Readiness Status. The Manufacturer-Related Health Check consists of the Systems Status and Readiness Status. (The MaxiAP AP200 app can save repair report for diagnostic and maintenance service sessions.)


4. Autel MaxiAP AP200H consists of OBDII/EOBD Diagnosis

The OBDII/ EOBD diagnosis is available to be downloaded through Mall. This option presents a quick way to check for DTCs, isolate the cause of an illuminated malfunction indicator lamp (MIL), check monitor status prior to emissions certification testing, verify repairs, and perform a number of other services that are emissions-related. The OBD direct access option is also used for testing OBDII/EOBD compliant vehicles that are not included in the Diagnostics database.
Note: Damage to the vehicle electronic control module (ECM) may occur if communication is disrupted. Make sure the wireless connection is properly connected at all times during testing. Exit all tests before disconnecting the test connection or powering down the tool.



APP Detail Information:

My Vehicle: Accesses the function to manually add Vehicle Makes.
Health Check: Accesses Health Check Function to carry out Vehicle Health Reports.
Diagnostics: Accesses Vehicle Diagnostic Functions.
Service: Accesses Service Functions Menu.
History: Accesses Diagnosis and Service records with Vehicle Information and DTCs included.
Repair Reports: Accesses repair reports for EOBD, Diagnostic, and Maintenance Sessions.
Application: AP200H-USA, AP200H-Asia, AP200H-Dms, AP200H-for BMW.

How to Make Autel AP200H Work?

Important Information

Legal Disclaimer

1. Autel AP200H Health Check Scanner -- "MALL" Application
2. This function button provides you a quick entrance to access app built-in mall and purchase the vehicle brand of your choice. Follow the instructions to download one free vehicle-line of your chosen brand. All brand lines are valid for up to a year.
3. Purchase vehicle diagnostic data package

NOTE:  When the MaxiAP AP200H has lost connection from the device for more than 10 minutes, the LED goes off and the AP200H enters power saving
standby mode. The power LED will light when reconnected.

Before purchasing vehicle diagnostic data package, you have to log in your Autel ID and bind the MaxiAP AP200H device with your account. One vehicle-line is free and valid for up to a full year, you can get it through Mall after successfully binding VCI for the first time.

1, Tap the Mall button on the Home screen, a list of brand lines sorted by alphabet will display.
2, The corresponding price of each software is displayed on the right side of the software.
3, Tap the price of wanted software and jump to the detail screen. You can see a detailed introduction of this software.
4, Tap Buy Now to purchase the software selected immediately.

Specification:

Package List:
1pc x AUTEL MaxiAP AP200H Main Unit